|
[OSMG2068] 13890 .21 VZ-B (P)-T V-Spec w/21C Slide Carb - MAP PRICE
This is the O.S. Max .21 VZ-B V-Spec-T (P) Off-Road 1/8 scale Racing Engine. Ideal for Mugens, Infernos, and hybrid trucks.
****** Because of the expressed racing nature of this engine, ****** ****** it is NOT covered by the O.S. 2 Year Warranty ****** ****** per page 25 of manual ******
FEATURES: Hardened, chrome-plated, 4-port, cylinder and liner for high durability and long life Machined steel piston features parallel rings that trap fuel oils and use them as a seal to enhance compression and boost power Reshaped crankcase core ensures smoother air flow and more consistent performance Slide Valve Carburetor with 8mm and 9mm Carb restrictors allow tuning to specific track conditions, Low-end Needle adjusts from side to side for maximum adjustment ease V-shaped two-piece turbo head design provides fast heat dissipation
INCLUDES: One .21 VZ-B V-Spec-T (P) racing engine w/21C carburetor One P3 Ultra Hot Turbo plug One instruction manual w/OS decal One extra head shim/gasket(The other gasket is pre-installed) One 8mm carb restrictor One 9mm carb restrictor One exhaust port seal ring Two carb rubber gaskets One carb cover One exhaust cover
REQUIRES: #203 Air Cleaner Assembly, OSMG2360 Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection.
SPECS: Practical RPM: 3000-40,000 Output: 2.48 bhp @ 33,000 RPM Bore: 0.654in Stroke: 0.630in Weight w/o Muffler: 12.7oz (360g) Height from crankcase bottom to top of cylinder head: 110.6mm (4.4") Height/crankshaft center to top of cylinder head: 95.3mm (3.8") Width including mounting ears: 45mm (1.8") Width not including mounting ears: 30.8mm (1.2") Width between mounting holes same side: 21mm (.83") Width between mounting holes opposite side: 37mm (1.5") Cylinder head diameter: 57.2mm (2.3") Length of exposed pilot shaft/crankshaft: 29.6mm (1.17") Internal thread size at end of crankshaft: 3mm
COMMENTS: Turbo glow plugs do not require a copper gasket. With the carb restrictors, the driver can select either low fuel consumption or high power, allowing a wide range of engine control. Usage is as follows: -9mm Blue: Fitted with Carb when it leaves the factory. suitable for high-speed and flat courses that require power. -8mm Red: Supplied with engine. Suitable for technical and bumpy courses and when less fuel consumption is more important.
|
Price: $299.99
Buy Product Online | Visit Store Home
|
|
Manufactured by O.S. |
|
|
Other Items from .21 - .28
[OS13980] 13980 .30VG (P) SR Savage w/21E Slide Carb - 13980
[OFN51214] Picco .26 Pull Start Rear Exhaust Engine. (Discontinued) - This bad boy Outlaw pullstart is rated at 2.7 HP with 37,000 RPM
[OFN53218] Hyper .21 8-Port Race Engine Rear Exhaust : MOD - 53218 This engine is rated at 2.7 HP with 38,000 RPM!!!
[OFN51221] Picco .21 Maxx, PS - Discontinued
Wasp .26 NON-PULL-START (Discontinued) - ORI86401
Wasp .26 Pull-Start - 86400 Discontiuned
[ORI80500] WASP .28 Engine W/ Pull Start - 80500 Discontinued
[SWK8080] Sportwerks .21 W/O PS SG - 8080 Discontiuned
[SWK8085] Engine /Sportwerks .26 W/PS SG - 8085 Discontinued
[HPI1406] Nitro Star S25 Engine w/PS (.25) - 1406
[OFN51230] Picco .27 Big Engine, PS, R Exh - Discontinued
|
Return To Hobby Store/ The Rc Shack/ Monster Trucks/ RC Cars/ Xray Xt8/ Xray XB808/ Radio Control
|
|
|